citrus-sew-vac-online

The Janome Clearview 1/4 inch Seam Guide Foot for 9mm is for 9mm models. The Janome Clearview 1/4 inch Seam Guide Foot for 9mm will give you a perfect 1/4" seam as long as you are using a Straight Stitch in the Center needle drop position.

Designed for fagoting and sewing thread fringe.

The foot creates dimensional threads loops on the top surface of the fabric. The loops can be also fringe by sewing with straight stitch along the root of loop and cutting bobbin thread.

 The Janome Low Shank Fringe Foot is designed for fagoting and sewing thread fringe.

The Janome zipper foot E is a snap on style foot. For use when sewing in zippers.

The Janome satin stitch foot F is used for sewing dense zigzag stitching. The bottom of the foot is beveled for smooth delivery of thread when sewing decorative or satin stitches. Foot is made of clear plastic making it easier to view stitching.

Use the Janome overedge foot C with an overcasting stitch to allow thread to wrap around the edge of the fabric to prevent unraveling. The Janome overedge C foot guides the fabric and keeps your edges flat by compensating for the lack of friction when the needle makes the right-most stitch.

Industrial type of overlock stitch for professional seam finishing. This stitch can be used to finish off a raw edge or for simultaneously seaming and overcasting.

Use the Janome overcast foot M with the overlock stitch to give a professional finish to the edges of your seams. The Janome overcast foot M is good for finishing off medium to heavyweight, easily frayed woven fabrics such as tweed, gabardine, and linen.

The Janome adjustable blind hem foot G is used to create a blind hem. Place folded fabric against the adjustable guide for an invisible blind hem. The adjustable blind hem foot is also great for top stitching and fabric tucks.

HEPA Filter for Kenmore EF-1

HEPA Filter for Kenmore EF-2

The Janome tricot foot is designed for even feeding of very lightweight and silken fabrics such as tricot.  The Janome tricot foot is a snap on foot.

These bags fit the R10E and SupraLite RSL model vacuums and the ESUPRA-6. NOTE: To order bags for SupraLite models R10S, R10D, R10P, and R10SAND, see part RLH-6. 

• We guarantee a proper seal and fit of the bags to eliminate dust from exiting any leaks and making sure the bag fits the connector well. 
• Our bags are designed to match our vacuum performance. Alternates may or may not have the same back pressures and/or filtration capability.
• Our bags are made to work with the stitching and pressures in our product. If the stitching tears, the bag then has a hole and will not filter the air properly. 
• Our bags are tested to match the vacuums for fit and still provide the correct gaps to ensure optimal air filtration. If another bag is too small or too large, or the wrong thickness, it can cause gaps and seals that can degrade the performance of the machine.

• 1600P-DB 
• 1600P-DBX

• 1600P-DB 
• 1600P-DBX

HEPA Filter for Kenmore CF-1

HEPA Filter for Dirt Devil F9

Fits Dirt Devil Classic and Purpose for Pets Hand Vacs

Filter for the Eureka Style CMF-1 Vacuums