citrus-sew-vac-online

The Janome Clearview 1/4 inch Seam Guide Foot for 9mm is for 9mm models. The Janome Clearview 1/4 inch Seam Guide Foot for 9mm will give you a perfect 1/4" seam as long as you are using a Straight Stitch in the Center needle drop position.

A popular foot with patch workers for that essential 1/4 inch seam. The guide on the foot enables you to sew a perfect 1/4 inch seam every time. The guide can also be used wherever a 1/4 inch seam is called for but the markings on the needle plate cannot be used, such as when completing a flat seam.

A very useful addition to the sewing room when wanting a perfection straight "stitch in the ditch." The guide on the foot spreads the seams allowing you to stitch perfectly in the ditch, and is also useful when adding decorative top stitching along seams.

Compatible with:

High-Shank Top-Loading 7mm Models

Low-Shank Top-Loading 7mm Models

Mechanical Top-Loading 5mm Models

The small needle hole of this foot prevents the light weight fabric from "buckling" and causing puckering or skipped stitches. It is also ideal for sewing very narrow seams.

The straight stitch foot is often used on very fine or very heavy fabrics. This particular foot is flat on the underside to provide an even pressure against the feed dogs and it has a rounded needle hole which offers the benefit of more support around the needle to prevent skipped stitches and puckering.

Don't waste time drawing straight lines on your quilt top! The Long Quilting Guide Bar is used to keep lines of quilting straight. The new extra-long format allows spacing up to 4 1/4". The set includes a Guide Bar for left and right placements, and the bars fit any Janome sewing machine.

Designed for fagoting and sewing thread fringe.

The foot creates dimensional threads loops on the top surface of the fabric. The loops can be also fringe by sewing with straight stitch along the root of loop and cutting bobbin thread.

 The Janome Low Shank Fringe Foot is designed for fagoting and sewing thread fringe.

The Janome zipper foot E is a snap on style foot. For use when sewing in zippers.

The Janome satin stitch foot F is used for sewing dense zigzag stitching. The bottom of the foot is beveled for smooth delivery of thread when sewing decorative or satin stitches. Foot is made of clear plastic making it easier to view stitching.

Use the Janome overedge foot C with an overcasting stitch to allow thread to wrap around the edge of the fabric to prevent unraveling. The Janome overedge C foot guides the fabric and keeps your edges flat by compensating for the lack of friction when the needle makes the right-most stitch.

Industrial type of overlock stitch for professional seam finishing. This stitch can be used to finish off a raw edge or for simultaneously seaming and overcasting.

Use the Janome overcast foot M with the overlock stitch to give a professional finish to the edges of your seams. The Janome overcast foot M is good for finishing off medium to heavyweight, easily frayed woven fabrics such as tweed, gabardine, and linen.

The Janome adjustable blind hem foot G is used to create a blind hem. Place folded fabric against the adjustable guide for an invisible blind hem. The adjustable blind hem foot is also great for top stitching and fabric tucks.

The Janome tricot foot is designed for even feeding of very lightweight and silken fabrics such as tricot.  The Janome tricot foot is a snap on foot.

• 1600P-DB 
• 1600P-DBX

• 1600P-DB 
• 1600P-DBX

The Janome Special Thread Spool Holder for Horizontal Spool Stand solves the problem of a larger spool of thread not fitting on your horizontal spool pin.  Use the Janome Special Thread Spool Holder for Horizontal Spool Stand with all Janome models.  The Janome Special Thread Spool Holder for Horizontal Spool Stand allows the spool of thread to be held tight to your spool pin without falling off or creating a gap.

Janome Black Bobbin Thread 100% Polyester , #90 weight thread in 300 meters spools.

Use With: All Janome Sewing & Embroidery Machines