citrus-sew-vac-online

The Janome Taping Guide Foot for 5mm and 7mm Models is the answer to attaching tape and binding to your garments and quilts.  Use the Janome Taping Guide Foot for 5mm and 7mm Models with all Janome snap on 5mm and 7mm models.  The Janome Taping Guide Foot for 5mm and 7mm Models works with tape from 5mm-20mm wide and can be used with both single fold bias tape and double fold bias tape.  You can adjust the Janome Taping Guide Foot for 5mm and 7mm Models to fit with width of your tape with just the turn of a screw.

Edge stitching could not get any easier with the Janome Sliding Guide Foot! You can adjust
the flange to sit up to a full inch away from the edge of the foot in seconds and create
perfectly straight hems every time with the Janome Sliding Guide Foot. The guide can be moved freely and easily by just lifting the lever in the back of the Janome Sliding Guide Foot, instead of having to mess with an annoying screw. The clear markings make certain you know exactly where you want your foot to go.

Sews a perfect circle or combination of circles using decorative or straight stitches. The Janome Circular attachment has a ruler on it that allows you to sew circles in various sizes.

The Janome AcuFeed Foot with Foot Holder. Now there is an AcuFeed Flex System for your more narrow projects! Sometimes, the standard AcuFeed Flex twin system is just a little too bulky for very fine work. With it, you can enjoy all the benefits of AcuFeed when you are creating more delicate projects.

Even Feed Foot also well known as a Walking Foot has its own set of feed dogs that work in conjunction with the machines feeding system to improve the flow of the fabric. This is particularly important when sewing several layers of fabric, such as in quilting. The Even Feed Foot “pulls” the top layer or layers of fabric through at the same speed as the machine’s feed dogs are pulling the bottom layers or layers of fabric. The walking foot is wonderful for fabrics that stretch or slip easily, such as velvet and corduroy. You won't believe how helpful this foot is for matching plaids and other difficult patterns perfectly.

Compatible With:

Low-Shank Top-Loading 7mm Models

Mechanical Top-Loading 5mm Models

16.6"L x 12" H x 8.5" D. Holds up to a 4120QDC

AcuStitch software gives you the ability to convert stitches into embroidery patterns and shapes. This software has several shapes and configurations to choose from, like polygons, circles, and ellipses, as well as straight lines and squares. 

Easy-to-use functionality

Designs can be created automatically with simple settings. Corner alignment, center alignment, start point, and endpoint alignment can also be done automatically. By simply changing the angle setting, you can create arcs and variations of your design. 

The Janome AcuFeed Open Toe Foot combines AcuFeeds perfect feeding system with an open toe to allow for a better view of sewing in progress.

Sometimes referred to as the embroidery foot, the darning foot is used for "free hand" embroidery and darning to ensure proper stitch formation, minimize skipped stitches and puckering and also protect your fingers while you move your fabric freely under the needle. Especially beneficial to those just learning how to do free hand embroidery. The open toe version greatly improves visibility of stitches and is especially popular with quilters.

The Janome Narrow Piping foot for 5mm and 7mm Models is used for piping with a cord diameter of about 2mm. The Janome Narrow Piping foot for 5mm and 7mm Models is useful for making narrow piping tape using the same fabric as the piece of work, or for attaching piping tape to fabric.

The Janome Narrow Piping foot for 5mm and 7mm Models has 2 grooves on the back side with the left one shorter than the right one. The Janome Narrow Piping foot for 5mm and 7mm Models is suitable for curve sewing as well. This foot can be used for topstitching as well.

The Janome Bi-Level Topstitching Foot For 7mm Models enables sewing at a constant width from the fold of the fabric.  The Janome Bi-Level Topstitching Foot For 7mm Models guides your top stitching and edge stitching perfectly. Thick materials (e.g. wool, denim, tweed) can be finished beautifully.

Easy to use foot with guide and guidelines.  By aligning the needle drop position with any of the 3 guidelines it is possible to sew 1.5, 5.0, or 8.5 mm from the edge of the fold.   The Janome Bi-Level Topstitching Foot For 9mm Models has a wide needle drop hold and supports needle positions from 0.0 to 7.0mm so you can sew with your favorite needle position.  You can also enjoy creating many pieces of work with decorative stitches.

This foot is compatible with all Janome snap on models that have 7mm stitch width.

 This Janome Concealed Zipper Foot for 9mm Models is compatible only the Janome machines that sew a 9mm stitch.  Good quality ready to wear garments will often have an invisible zip fitted. These zippers are often neglected by the home dressmaker which is a pity because they can ensure success every time. Invisible zips are suitable for all fabrics from fine silk jersey through to suit weight wools and tweeds. The key is to get the needle as close to the fastener as possible, which this foot accomplishes by slightly unrolling the zipper just before the needle. Once fitted, a well sewn invisible zipper will merely look like part of the seam.

The Janome AcueFeed Zipper Foot 9mm is used with the AcuFeed Single System engaged on your Janome Sewing Machine. Janome AcuFeed Zipper Foot 9mm makes installing zippers easy on thick and layered fabrics.

The Janome AcuFeed 1/4 Inch Quilt Piecing Foot (Twin) is used with the AcuFeedsystem engaged on your Janome sewing machine.  The Janome AcuFeed 1/4 Inch Quilt Piecing Foot (Twin) is an interchangeable foot for the Acufeed Flex twin holder. This Janome AcuFeed 1/4" Quilt Piecing Foot (Twin) has a built in flange to keep your seams at the 1/4" all the way around. 

This Janome Sewing Foot Accessory Box is ideal for any sewing machine to store all of your sewing feet in.  Use the Janome Sewing Foot Accessory Box to stay organized.  The Janome Sewing Foot Accessory Box has a removable tray and locks closed.  Feet are not included, picture if for demonstration purposes.

The Janome Sewing Machine Mat for MB-4 MB4N is an original Janome part. The Janome MuJanome Sewing Machine Mat for MB-4 MB4N backing is an absorbent fabric and the top is gray with the Janome logo on it. The Janome Sewing Machine Mat for MB-4 MB4N really makes the machine sound quiet and reduces vibration. The Janome Sewing Machine Mat for MB-4 MB4N also keeps your machine from sliding around on the table top. Super for a serger, too!

Measures 14.5 inches by 24 inches

Great for Janome MB4 and MB7

Use to pipe the edge of a sewing article to decorate or strengthen. Includes 3mm (1/8") foot and 5mm (3/16") foot.

Use with Janome Serger models: 1110DX, 204D, 434DR, 634D, 644D, 7034D, 734D, 744D, 9002D, HF3434D, HF504D, HF9102D HF7933, 7034D, 8002D, FA4, Four DLB, Air Thread 2000

Straight stitch foot with needle plate for sewing on fine fabrics.

• Use with: 763, 806, DBJ628, DBJ701, DBJ706, DBJ707, DBJ708, DBJ806, 1600P, 1600P-DB, 1600P-DBX, 1600P-QC